The X-Pert is the top selling portable-spinning dance pole on the market.   It comes ready for ceiling heights between 7’4” to 9’.  The dance pole can either be set to spin or static (non-spinning) mode.

The X-Pert takes advantage of X-Poles X-Joint technology which allows for easy and rapid deployment of the dance pole.

Whats in the box:

• Base Plate:  small base plate with rubber bottom seal so as to not damage the floor when installed
• Main Pole A:  this pole comes attached to the height adjuster and adjuster cover. (The adjuster cover is finely threaded allowing for a smooth pole from top to bottom)
• Main Pole B: when main pole B is attached with no further extensions, the dance pole will be ready for ceilings between 7’9” to 8’2”
• 125mm (5”) extension:  this is the shortest of all extensions.  When attached to the main poles (main poles A and B) the dance pole will fit ceilings between 8’2” and 8’7”
• 250mm (10”) extension:  this extension comes attached to the 200mm X-Joint.  When used in conjunction with all other pole pieces, the dance pole works on ceilings between 8’7” and 9’
• 180mm X-Joint (1 unit) comes attached to the 125mm extension.
• 200mm X-Joint (2 units): these two joints are used to connect the larger poles.
• Top Adapter: attaches the top pole piece to the support dome.
• Support Dome: this 16” domes rests between your ceiling and your pole pieces.  It comes with a silicone seal/barrier so as to not damage or leave marks on your ceiling when installed.
• Allen Wrench:  the ONLY tool you will need to install the dance pole
• 2 carrying cases:  When take apart, once case will hold all pole pieces while the second is specifically made to hold the micro base plate and upper support dome.
• Instruction Manual with Photos

**if your ceiling height is less than 7’4” inches, please contact us with the height and we will guide you in the process of getting the correct extensions for your particular situation.

Get to know your X-Pole video